Made from Stainless steel all of our round and square post clips are anti rotational and are supplied complete with a 'LipLock' Bolt, Nut and washer. Most sizes are also available in Grey to match the post colour, or Black, a full size range of coloured clips will soon be available.

Our 2 Bolt clips are available from 127mm and upwards, as with the single bolt clips the 2 bolt clips are manufactured from stainless steel, are anti-rotational and use 'LipLock' Bolts. 2 bolt clips are extremely strong and are manufactured to a very high standard to ensure durability.

These 2 bolt clips are specifically designed to allow fixing panels to those awkward small tubes. Like the Standard Clips Mini D clips are manufactured using high quality Stainless steel and incorporate 'LipLock' Bolts. Mini D Clips are available in four different sizes: 13mm, 16mm, 19mm & 25mm. They are ideal for fixing to Chain Link Fencing, Railings, Concrete Roof Supports etc, etc.

When a Plate & Post system is required to be double sided by far the easiest way to achieve this is to use double sided clips. Manufactured with the same high quality Stainless steel as the other clip the Back to Back clips incorporates a 'LipLock' bolt. These clips are available in most sizes to suit most common post sizes & shapes. See our Technical Sheets for a diagram & explanation.

One of the most common difficulties when undertaking installation is finding a suitable and secure way of fixing signs in unusual places.

When a standard clip is not suitable there are still options that can be safely used.

Screw banding is similar to the principle of a jubilee clip, supplied in standard lengths of 24" & 36" (larger sizes available on request). Screw banding is then used in conjunction with various types of channel clamp to secure the sign. A flat blade screwdriver is the only tool necessary to fit screwbanding.

Stainless steel banding is generally used where a greater level of strength or security is required. Stainless steel banding works on the same principal as screw banding but requires a bespoke tool to tighten and cut the banding. (Channel clamps and buckles are also required). Banding can also be a more cost-effective method of installation where a large number of signs are to be fitted. Banding is available in two widths 13 & 19mm, both are standard to the same banding tool. Buckles are supplied in quantities of 100 and banding in 30 metre rolls. Although screwbanding and stainless steel banding are generally a more expensive method of fixing than standard clips they have the advantage that once on your fitting vehicle you will be prepared for almost any odd or unusual fitting problem.